Figure 2. 13
Adding IP Camera Interface
2.
The online cameras with same network segment will be detected and displayed in the camera list.
3.
Select the IP camera from the list and click the
button to add the camera (with the same admin password
of the DVR’s). Or you can click the
One-touch Adding
button to add all cameras (with the same admin
password) from the list.
Make sure the camera to add has already been actiavted by setting the admin password, and the admin
password of the camera is the same with the DVR’s.
4.
(For the encoders with multiple channels only) check the
checkbox
of Channel Port in the pop-up window, as
shown in the following figure, and click
OK
to add multiple channels.
OPTION 2:
Steps:
1)
On the IP Camera Management interface, click the
Custom Adding
button to pop up the Add IP Camera
(Custom) interface.
Figure 2. 14
Custom Adding IP Camera Interface
2)
You can edit the IP address, protocol, management port, and other information of the IP camera to be
added.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
