The HTTPS port can be only configured through the web browser.
Steps:
1.
Open web browser, input the IP address of device, and the web server will select the language automatically
according to the system language and maximize the web browser.
2.
Input the correct user name and password, and click
Login
button to log in the device.
3.
Enter the HTTPS settings interface.
Configuration > Remote Configuration > Network Settings > HTTPS
4.
Create the self-signed certificate or authorized certificate.
OPTION 1
: Create the self-signed certificate
1)
Click the
Create
button to create the following dialog box.
Figure 11. 16
Create Self-signed Certificate
2)
Enter the country, host name/IP, validity and other information.
3)
Click
OK
to save the settings.
OPTION 2
: Create the authorized certificate
1)
Click the
Create
button to create the certificate request.
2)
Download the certificate request and submit it to the trusted certificate authority for signature.
3)
After receiving the signed valid certificate, import the certificate to the device.
5.
There will be the certificate information after you successfully create and install the certificate.
Figure 11. 17
Installed Certificate Property
6.
Check the checkbox to enable the HTTPS function.
7.
Click the
Save
button to save the settings.
11.2.8
Configuring Email
Purpose:
The system can be configured to send an Email notification to all designated users if an event is detected, e.g. an
alarm or motion event is detected, etc.
Before configuring the Email settings, the DVR must be connected to a local area network (LAN) that maintains
an SMTP mail server. The network must also be connected to either an intranet or the Internet depending on the
location of the e-mail accounts to which you want to send notification. Additional, the Preferred DNS server must
be configured.
Before you start:
Make sure you have configured the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the Preferred DNS Server
in the Network Settings menu. Please refer to
Chapter 11.1 Configuring General Settings
for detailed information.
Steps:
1.
Enter the Network Settings interface.
Menu > Configuration > Network
2.
Select the
tab to enter the Email Settings interface.
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
