LSIS SV-iV5 Series, User Manual

Page: 51 / 131

4. Trial Operation
4-4
4.4 Data Groups
SV-iV5 series inverters use LCD keypad for user’s convenience. Data groups are
divided into 12 groups for easy access depending on the inverter application.
Name
LCD keypad
(on the upper left)
Description
Display
group
DIS
Motor speed, Motor control mode, Generating torque,
Output current, User selection display, Process PID
output/reference/feed-back value, Fault display, User
group display setting and so on.
Digital I/O
group
DIO
Digital Input /Output parameters and so on.
Parameter
group
PAR
Parameter initialization, Parameter read / write / lock
/password, Constant which is motor related, Auto-tuning
and so on.
Function
group
FUN
Operating frequency, Operation mode, Stop mode,
Acceleration /deceleration time and pattern, Carrier
frequency, Electronic thermal selection and so on.
Control
group
CON
Control mode, ASR PI gain, Process PID gain, Draw
control setting, Droop control related constants, Torque
control related constants, V/F control related constants
and so on.
Exterior
group
EXT
Built-in 485 communication parameter and
communication parameter when the exterior option board
is installed.
Analog I/O
group
AIO Analog Input /Output Parameter and so on.
User group USR
User macro function, macro function save, macro
function recall
2
nd
function
group
2
nd 2)
2
nd
motor control mode, 2
nd
motor accel./decel. time, 2
nd
motor parameters and so on.
Elevator
group
E/L
2)
It is displayed when EL_I/O option board is installed,
Elevator operation function setting parameter and so on.
Synchronous
group
SYNC
2)
It is displayed when SYNC_I/O option board is installed.
Synchronous operation function setting parameter and so
on.
WEB group WEB
2)
Diameter and Tension control setting parameter while
WEB control.
Sensorless
control
group
SLS
2)
Open Loop control setting parameter which is not using
the position sensor as encoder, resolver and, etc..
1) Group name: It is displayed when option board is installed, Refer to the
option manual for more details.
2) It is displayed when the option board is installed and CON (control) mode is
changed to it. Refer to the user manual related to the option board.