5
1.4 General
•
LSIS does not assume any liability for damages caused by failure to observe the warnings
given in these operating instructions.
•
Before first operation, thoroughly read through the operation and maintenance instructions and
the safety notes.
•
Proper and qualified transport, storage, assembly and installation, as well as conscientious
operation and maintenance are preconditions for faultless and safe operation of this unit.
•
Assign trained and qualified personnel to work with electrical systems.
Only suitably trained and qualified personnel should work on this unit. To be qualified,
personnel must be sufficiently familiar with assembly, installation, and operation of the product,
as well as with all warnings and precautions mentioned in these operating instructions.
Furthermore, these qualified personnel must be trained, instructed, or authorized to switch on
and off, and to ground electric circuits and devices according to the safety regulations, and to
mark them appropriately according to the work instructions. Qualified personnel must be in
possession of sufficient safety equipment, and have first aid training.
•
Use only accessories and spare parts approved by the manufacturer.
•
The safety laws and regulations of the country in which the unit will be used must be observed.
•
The ambient conditions specified in the product documentation must be met.
•
It is not permitted to put the system into operation until the system in which the products are
installed has been found to conform to the national regulations and the safety regulations for its
application.
•
Operation is only admissible if the national EMC regulations for the respective application are
observed.
•
The manufacturer of the system or machine is responsible for compliance with the limits
specified by national regulations.
European countries: EC Directive 2004/108/EC (EMC Directive).
•
The technical data and conditions for connection and installation are given in the product
documentation, and must be strictly complied with.
