LSI SAS2 Integrated RAID Solution, User Manual

Page: 40 / 42

Appendix A:
|
Commands SAS2 Integrated RAID Solution User Guide
Page 40 LSI Corporation Confidential
|
August 2010
A.3.8 MFGPAGE Command
The MFGPAGE command updates information on manufacturing pages. Only DOS and
EFI support this command.
Command Line
sas2ircu < controller_# > mfgpage < passcode > < mfgpage_# >
< offset > < value >
Parameters

< controller_# >
– The index of the controller with the manufacturing pages
you want to update.

< passcode >
– The passcode required for DOS access.

< mfgpage_# >
– The manufacturing page (4 or 10) that requires an update.

< offset >
– The DWord offset of the specified manufacturing page that requires
an update, in hexadecimal format.

< value >
– The value for the offset to be modified, in hexadecimal format.
Program Return Value
0x00 SUCCESS: Command completed successfully.
0x01 FAILURE: Bad command-line arguments or operational failure.
0x02 ADAPTER_NOT_FOUND: Cannot find specified adapter.
A.3.9 CONSTCHK Command
The CONSTCHK command sends requests to the Integrated RAID firmware to start a
consistency check operation on the specified volume.
Command Line
sas2ircu < controller_# > constchk < volumeId > [noprompt]
Parameters

< controller_# >
– The index of the controller on which the consistency check
operation will run.

< volumeId >
– The volume ID of an Integrated RAID volume, as listed in the
DISPLAY command, on which the consistency check operation will run.

noprompt
– This optional parameter prevents warnings and prompts from
appearing while the command is running.
Program Return Value
0x00 SUCCESS: Command completed successfully.
0x01 FAILURE: Bad command-line arguments or operational failure.
0x02 ADAPTER_NOT_FOUND: Cannot find specified adapter.
A.3.10 ACTIVATE Command
The ACTIVATE command activates an inactive Integrated RAID volume.
Command Line
sas2ircu < controller_# > activate < volumeId >
Parameters

< controller_# >
– The index of the controller with the volume that requires
activation.

< volumeId >
– The volume ID of an Integrated RAID volume currently in the
Inactive state.
Program Return Value
0x00 SUCCESS: Command completed successfully.
0x01 FAILURE: Bad command-line arguments or operational failure.
0x02 ADAPTER_NOT_FOUND: Cannot find specified adapter.