Appendix A:
|
Commands
SAS2 Integrated RAID Solution User Guide
Page 36
LSI Corporation Confidential
|
August 2010
Sample Output
Following is a sample of the information that the DISPLAY command returns.
Read configuration has been initiated for controller 0
------------------------------------------------------------
Controller information
------------------------------------------------------------
Controller type
: SAS2008
BIOS version
: 7.00.02.00
Firmware version
: 00.250.19.0
Channel description
: 1 Serial Attached
SCSI
Initiator ID
: 112
Maximum physical devices
: 62
Concurrent commands supported
: 266
Slot :
3
Segment
: 0
Bus
: 64
Device
: 1
Function
: 0
RAID Support
: Yes
------------------------------------------------------------
IR Volume information
------------------------------------------------------------
------------------------------------------------------------
Physical device information
------------------------------------------------------------
Initiator at ID #112
Device at ID #335524
Device is a Hard disk
Enclosure # : 2
Slot # : 2
Connector ID : 4
State : Ready (RDY)
Size (in MB)/(in sectors) : 70007/143374738
Manufacturer : HP
Model Number : DG072A9BB7
Firmware Revision : HPD0
Serial No : B365P720H7330709
Protocol : SAS
Drive Type : SAS
------------------------------------------------------------
Enclosure information
------------------------------------------------------------
Enclosure# : 1
Logical ID
: 51234567:89012345
Numslots : 8
StartSlot : 0
