LSI-Robway RCI-1502 HRT, Instruction Manual

Page: 42 / 109

RCI-1502 HRT Tele Boom Manual
9. Use the Up/Down Arrow keys to go through the
list of the four (4) Edit Codes as follows:
Edit
Codes Description
Lo_r Raw Counts of Calibrated Data (Low
End)
Lo_c Calibrated Data (Low End)
Hi_r Raw Counts of Calibrated Data (High
End)
Hi_c Calibrated Data (High End)
10. Th e f irst E dit C ode is
Lo_r
which refers to the
raw counts or raw data of the calibrated low
angle
( e.g., 12 8 cou nts as sh own in t his
example).
11. Press the ENTER key to access edit mode (i.e.
the wo rd “ EDIT” c omes up on the to p window,
or centre window if the system is an RCI-4000).
12. Use the U p/Down Arrow keys to c hange the
Lo_r
value with the previously copied data.
13. Press the ENTER key to store this new value to
Lo_r
(e.g. from 12 8 to 10 9 a s s hown in th is
example).