15
3.
Periodically lubricate the front and rear rollers to keep them at their peak performance. If the treadmill
belt/deck/roller is kept reasonably clean it is possible to expect over 1200 hours before relubricating is
necessary.
NOTE: DO NOT over lubricate running deck. Any excess lubricant that comes out should be wiped off.
4. How to check the running mat for proper lubrication:
1. Disconnect the main power supply.
2. Fold the treadmill up into the storage position.
3. Feel the underside surface of the running mat.
If the surface is slick when touched, then no further lubrication is needed.
If the surface is dry to the touch, apply a suitable silicone lubricant.
We recommend that you use a silicone-based spray to lubricate your Lifespan treadmill. This can be
purchased directly from us or any hardware store.
5.
Adjusting the Running Belt
The running belt is pre-adjusted to the running deck at the factory, but after prolonged use it can stretch and
require readjustment.
To adjust the belt, turn on the main power switch of the treadmill and let the belt run at a speed of 8-10
KPH. Use the Allen Wrench provided to turn the rear roller adjustment bolts in order to centre the belt.
If the running belt is shifting to the left, turn the left adjustment bolt 1/4 turn clockwise, and the running
belt should start to correct itself.
Video Tutorial Available at:
http://youtu.be/vllsamTSvvA
Lifespan Fitness Channel:
http://www.youtube.com/user/treadmillsvideos
Summary of Contents for PACER M4
Page 7: ...7 4 PARTS LIST...
Page 13: ...13...
