3 - 11
2) INHIBITED REGEN mode
z
ONLY use this mode when operating the vehicle
in woods or handling flammable items or other
regeneration prohibition area according to your
local regulation. It can reduce the risk of
catching fire, by turning off burner and reducing
high temperature exhaust gas unexpected.
z
To set this mode, press the lower side of the
DPF switch for over 2 seconds
.
z
At this time, the
DPF inhibited indicator
shall
be
ON
and AUTO REGEN mode shall be halted.
z
To exit this mode, press the upper side of the
DPF switch for over 2 seconds.
z
When restarting engine, this INHIBITED mode
shall return to the AUTO REGEN mode
automatically.
z
If the DPF regen indicator and engine warning
indicator are blinked or while the regeneration is
performing, this INHIBITED REGEN mode could
not be set. Try it again after that the
regeneration has been finished.
▶
When coming out from the regeneration prohibition area or work, HAVE TO press
the upper side of the DPF switch for over 2 seconds to return the AUTO REGEN
mode. If not, soot may be overloaded in DPF and it may result in moving into
restriction mode if you should fail to cancel.
Caution
DPF inhibited indicator
DPF switch
DPF regen indicator
DPF temperature
indicator
▶
The regeneration can be initiated when both engine and DPF become warmed up
as designated. When engine does not become warmed up enough, it may take time
until regeneration is initiated.
Caution
