5 - 19
5-8. Every 250 hour check
(1) Replacing Engine oil and Filter
▶
When engine oil is warm, the
impurities can be drained
completely.
Notice
①
Drain Engine oil
z
Run engine for a few minutes to warm oil
z
Park the tractor on a level surface.
z
Remove drain plug of oil pan and drain the oil
completely.
Close
Open
Oil filling inlet
Drain plug
Packing
③
Fill Engine oil
z
Tighten the drain plugs. (Tightening torque :
40
±
5 N.m) (29.5
±
5 lbs-ft)
z
Add engine oil as its capacity and check the oil
level is between MIN and MAX mark on gauge.
For oil specification, refer to “Lubricants and
Capacity” at the end of this manual.
(or See page5-6)
z
Check any leakage of the engine while running
the engine for several minutes at idle rpm.
z
Stop the engine. After about 5~10 minutes later,
check again if the oil level is between MIN and
MAX mark.
z
Install the oil gauge.
②
Replace Engine oil filter
z
Clean carefully around the filter.
z
Coat clean engine oil on the packing of new filter
and check the packing is placed well in the
groove.
z
Turn the oil filter counter-clockwise to remove
with filter wrench.
z
Turn the new filter clockwise to assemble until the
packing makes contact with the mounting surface.
Tighten ¾ to 1 turn more after packing contact.
z
If the metal is attached to the element of oil filter
to be disassembled, contact your authorized
dealer.
Engine oil gauge
