LS tractor LL4100, Operator'S Manual

Page: 16 / 46

LOADER REMOVAL
CAUTION:
CAUTION: CAUTION:
CAUTION:
CAUTION: CAUTION: CAUTION: CAUTION:
Never park loader without bucket
attached to the loader.
Never allow weight of tractor to be put
on parking leg when removing loader.
▶
▶ ▶
▶ Park the tractor and loader on hard level
surface.
▶
▶ ▶
▶ Raise the boom until the bucket is about 2
feet off the ground.
▶
▶ ▶
▶ Set the parking legs with pin-hand and
Keeper.
▶
▶ ▶
▶ Lower the boom until the Parking legs
make contact on the ground.
Tip the bucket until the bucket cutting edge
touch the ground.
▶
▶ ▶
▶ Pull the control lever to raise the loader until
the post.
Adjust the bucket until the bottom surface of
bucket touch the ground.
▶ ▶ ▶ ▶ Move the tractor backword slowly and stop
to avoid the hydraulic hoses being tighten.
▶ ▶ ▶ ▶ Stop the engine and move the control lever
- 15 -
▶
▶ ▶
▶ Remove the latch pin while move the
control lever back and forth slightly to make
the latch pin easy.
▶ ▶ ▶ ▶ Stop the engine and move the control lever
back and forth, left and right several times to
reduce the hydraulic pressure in the hoses.
▶
▶ ▶
▶ Disconnect the quick couplers on the
hydraulic hoses.
PIN PIN PIN PIN
STAND
STAND STAND
STAND
PIN PIN PIN PIN----HAND HAND HAND HAND
- 15 -