LRS T7450A User Manual Download Page 31 | Manualshive

Page: 31 / 43

LRS T7450A User Manual Download Page 31

Long Range Systems

30

T7450A User Manual

8: Guest Prompt – enable or disable a guest message prompt.

9: TX Time & Date – enables or disables the transmitter from automatically sending the Time and

Date to the pagers.

5. Press EXIT when done.

Set Pager Vibration ON/OFF

Rechargeable pagers can have their vibration turned on or off as a system.

1. Be sure all the pagers are in the charger.

2. Press Setup.

3. Press “MORE” (F1) until you are asked for the authorization code.

4. Now type 5-6-7-8-9.

5. Press the MORE (F1) key the display shows 2:Prog. Vib.

6. Press the “2” key.

7. Unplug the charger power supply.

8. The pagers will vibrate and flash.

9. At the “Program Vibration: screen on the transmitter, press ON (F1) to turn on vibration, OFF (F2)

, or EXIT (F4)..

10. The pagers will slowly brighten and dim to off to indicate they are being programmed.

11. .When finished, plug the charger power supply back in.

Station ID

Station ID is often confused with Restaurant ID. This function is used where more than one station of the
same establishment may be paging staff pagers. The indictors on the pager will show this code. To set a
different station number:

1. Press SETUP.

2. Press “MORE” (F1) until you are asked for the authorization code.

3. Now type 5-6-7-8-9.

4. Repeatedly press F1 until you see 1: Prgm Station ID on the menu.

5. Press 1. The display will show the current station number for the pager to display (default is 1).

6. Press a number to use (0 – 9).

7. Press F1 (OK) to change the code or F2 (Exit) to return without change.

Adjust Transmit Power

The range may be increased or decreased from the keypad. The power levels are 1 through 5. Find a power
level using Range Test that best suits your restaurant and leave it that way. Default from the factory is power
level 3. To set the power level:

1. Press SETUP.

2. Press “MORE” (F1) until you are asked for the authorization code.

3. Type 5-6-7-8-9.

4. Repeatedly press F1 until you see 2: Program TX Pwr on the menu.

5. Press 2.

6. Set the required power level (from 1 through 5).

7. Press F1 (OK).

«
...
29
30
31
32
33
...
»

Summary of Contents for T7450A












































Reviews:

No comments