Distinctive Ring Service
The phone company's Distinctive Ring service (DRS) is offered in most areas across the U.S. Phone compa-
nies offer this service under various names; check with your local phone company for details (service acti-
vation required).
When a second, third or fourth phone number is added to a single line, the LineShare Pro 104 processes
calls without depending on access codes or transfer tones.
The factory default for Distinctive Ring Detection is OFF. When turned ON, the LineShare Pro 104 will process
the additional phone numbers (ring styles) as follows:
port P1- - - standard ring
port P3- - - three-burst ring (short-short-long)
(short-short-short)
(long-long-long)
(long-short-short)
(short-long-long)
port P2- - - two-burst ring
port P4- - - three-burst ring (short-long-short)
(long-short-long)
(long-long-short)
NOTE:
If a ring burst is not assigned to a port, the LineShare Pro 104 will not answer a call ringing with
that specific cadence. (These settings are the default settings for transferring calls and can be
changed to meet end-user needs.)
When Distinctive Ring Detection is turned ON, the following features are automatically deactivated:
Automatic Primary Port Transfer Automatic No Answer Transfer Automatic Ring Reduction
When Distinctive Ring is turned ON, the LineShare Pro 104 will process calls in the current operating mode.
Calls will be processed differently in the Automatic mode and Semi-Automatic mode as described below.
Long Range Systems
13
LineShare PRO