Settings
To view the current pager settings
1. Remove pager from the charger or reset on the T9601, T9100, or T9101 reset terminals.
2. Press the Select Button repeatedly to scroll through the settings:
C1: [System ID number] and Pager ID number
C2: [System ID number] and All Page number
C3: [System ID number] and System ID number
G: Group number
Enc: Encryption enabled (128) or none
Ver: Current Firmware Version
3. To exit, wait 8 seconds.
Messages
The pager stores the last 5 received messages.
To view the messages:
1. Press the Select Button once.
2. Messages 2 lines in length will show a > symbol on the end of the first line and a < on the second line.
Messages over 2 lines in length, the middle lines will show “< the next line of the message >”.
3. Press the Select Button to continue scrolling forward through the message or messages.
Time
Pager will display the current time. The Freedom Transmitter (T7460) automatically updates this feature. If
the time does not appear, a flashing star will appear on the right side of LCD to show pager is operational.
Programming
To program the pager see pg. 28
Using Non-Alphanumeric Guest Pagers
Charging
Any rechargeable guest pager will require use of an LRS charger.
1. Place the guest pager in the charger. For 15 Coasters, 10 Pizza pager, and 10 Lobster call pagers.
Do not stack more than 10 pagers at a time on a Charger.
2. Allow unit to charge fully overnight.
3. Remove from charger, and pager will vibrate, beep, and light all lights as a verification that it is
working.
4. Replace the pager in the charger at the end of each day.
Long Range Systems
39
Freedom User Manual
