Feature Setup Procedures
User Password
All of the functions that adjust paging preferences are protected by a Password.
• To reduce tampering with critical settings, the keypad is password protected.
• The Password 56789 allows you to enter most restricted programming screens.
• Press F4 at any menu to return to the Guest menu.
Set Manager Password
To change the Manager Password:
1. Press SETUP and enter Password.
2. Press F2 (DN).
3. Select 3) Manager Password.
4. Type in new 5 digit Manager Password and press Enter.
Set Page Mode
This programs how guest and staff pagers will respond when paged. Guest pagers can flash, beep, glow,
flash and beep, etc. To set the modes:
1. Press SETUP and enter Password.
2. Press F2 (DN).
3. Select 1) Page Mode.
4. Select 1 (1:Guest) or 2 (2:Staff).
Guest Pager - Select:
Note:
An asterisk next to a mode indicates that is the current Paging Mode.
Press 1) Flash/Beep/Glow.
Select a page Mode.
1) Flash 30 sec.
2) Flash 5 mins.
3) Beep/Flash.
Press F2 (DN).
1) Flash 1 sec.
2) Glow 15 times.
3) Glow 5 mins.
Press F2 (DN).
1) Beep 3 times.
2) Beep continuously.
Long Range Systems
15
Freedom User Manual
