power levels are 1 through 5.
Default from the factory is power level 3. Reset only by direction from LRS.
To set the power level:
1. Press SETUP and enter Password.
2. Press 1) System, press F2 (DN) until the display shows 2) Transmit Power.
5. Press 2 (2:Transmit Power).
6. Set the required power level (from 1 through 5).
7. Press ENTER.
Locating Misplaced Pagers
Two location modes are available for finding lost or misplaced pagers/coasters. Auto Locate Mode auto-
matically searches at a preset time, Run Locate Mode searches on demand.
CAUTION:
Do not set auto locate to run or use Run Locate feature while pagers are handed out.
All pagers will be paged!
Auto Locate Mode
Auto Locate sends a signal to ALL coasters/pagers at a preset time. The coasters/pagers will beep so that staff
can locate them.
Example:
If closing at 11:30PM, the transmitter can be set to auto locate at 12:30AM, causing all miss-
ing coasters/pagers to beep at that time.
When activated:
• A signal is sent out to ALL coaster/ pagers.
• Pagers will Beep or Flash until the pagers are placed on the charging unit or the batteries go
dead. In the case of battery operated pagers, the battery must be removed to stop the beeping.
To activate:
1. Press SETUP and enter Password.
2. Press 3 (OTHER.
3. Press F2 (DN).
4. Choose 1 (1:Auto Locate) to program auto locate.
5. Press F1 (YES) to turn Auto-Locate mode on or press F2 (NO) to turn off.
6. If turning function ON, enter a starting Time of Day for Auto Location (HH:MM).
7. Press F1 (AM) or F2 (PM).
If turning function ON:
8. Enter Start Time for Auto Location (- -: - -) and press ENTER to continue.
9. Press F1 (AM) or F4 (PM).
Run Locate Mode
Run locate is used to immediately locate any misplaced coasters around the restaurants (ideal during closing hours).
When activated:
• A signal is sent out to ALL guest pagers.
• Pagers will Beep or Flash until returned to charging unit or batteries removed.
To activate
1. Press SETUP and enter Password.
2. Press 3 (OTHER).
3. Choose 3 (Locate Pagers).
4. Press ENTER to begin locating pagers.
!
Long Range Systems
24
Freedom User Manual
