background image

Lowrance - LHR-80 Installation and Operation Instructions

74

General remarks to Country Specific table: 

The channels for service categories ship-to-ship and nautical information may also 
be used for vessel traffic -sys tems by traffic centres.

In some countries, frequencies certain channels are used for an other service catego-
ry or other radio services. These countries are Austria, Bulgaria, Croatia, the Federal 
Republic of Yugosla via, Hun gary, Moldova, Romania, the Russian Federation, the 
Slovak Republic, the Czech Republic (with exemption of channels 08, 09, 72, 74 and 
86), Ukraine and the Federal Republic of Yugosla via. The Administra tions concerned 
should make any possible attempt to make these fre quencies channels as soon as 
possible available for the radiotelephone service on Inland Waterways and/or the 
required service catego ry.

76

j) d) o)

156.825

156.825

x

17

h) j)

156.85

156.85

x

77

a) k)

156.875

156.875

x

18

156.9

161.5

x

78

156.925

161.525

x

19

156.95

161.55

x

79

a)

156.975

161.575

x

20

157

161.6

x

80

157.025

161.625

x

21

a)

157.05

161.65

x

81

a)

157.075

161.675

x

22

157.1

161.7

x

82

l) m)

157.125

161.725

x

23

m)

157.15

161.75

x

83

a) m)

157.175

161.775

x

24

m)

157.2

161.8

x

84

m)

157.225

161.825

x

25

m)

157.25

161.85

x

85

a) m)

157.275

161.875

x

26

m)

157.3

161.9

x

86

a) m)

157.325

161.925

x

27

m)

157.35

161.95

x

87

a) d)

157.375

157.375

x

28

m)

157.4

162

x

88

a) p)

157.425

157.425

x

AIS 1 a) n)

161.975

161.975

AIS 2 a) n)

162.025

162.025

Summary of Contents for LHR-80

















































































Reviews: