Lowrance LHR-80 Page 24 Installation And Operation Instructions Manual Download

Page: 24 / 80

Lowrance - LHR-80 Installation and Operation Instructions

Section 4 - Advanced Operation

How to Display and Navigate Menus

Hold down CALL / MENU key to enter in menu (US only); or press MENU key to enter

setup mode (EU only).

Press CH

/ to scroll up and down the menu until the cursor is positioned at the

desired items. Press soft-key ENTER to enter into the items.

Press soft-key ENTER to confirm changes. Otherwise, press soft-key ESC to ignore.

Press soft-key ESC to go back or exit. Any changes are activated as soon as you enter/

exit the screen.

How to Enter Alphanumeric and Alphabet Data

Use the CH / key to enter characters.

Press

to enter and count through numbers and letters, and hold down to select the

desired character.

Press

to go through letters of the alphabet, and hold down to select the desired

character.

Press ENTER to confirm.

The following options are available through MENU:

• ATIS MMSI
(EU only)

• ATIS Select
(EU only)

•  Waypoint
•  Backlight
•   Lamp
•  Buddy List

  (US only)
•  Contrast
•  GPS/Data
•  RADIO SETUP
•  DSC Setup

(US only)
• ATIS SETUP

  (EU only)
•  GET BUDDY
•  Track Log
•  Erase Track
•  RESET

MENU

• MANUAL

• SETTING

• UIC (US only)

• CH NAME

• RING VOLUME

• KEY BEEP

• UNITS

• WATCH MODE
(US only)

• WX ALERT
(US only)

• NMEA OUT

• User MMSI
(US only)

• Group MMSI
(US only)

• Idiv Reply
(US only)

• DSC SELECT
(US only)

• LL Reply
(US only)

Summary of Contents for LHR-80
















































































Search results

Summary of Contents for LHR-80

Reviews:

Related manuals for LHR-80

Brands by name

Popular brands

Lowrance LHR-80, Installation And Operation Instructions Manual

Search results

Summary of Contents for LHR-80

Reviews:

Related manuals for LHR-80

Brands by name

Popular brands