Lowrance LHR-80 Installation And Operation Instructions Manual Download

Page: 40 / 80

Lowrance - LHR-80 Installation and Operation Instructions

4-7-6 Set the Priority Channel (WATCH MODE) US Only

If you are operating on the USA or Canada Channel banks. You can have the priority channel
to cover both CH16 and CH09 as well as the working channel, similar to a TRI WATCH.

Select RADIO SETUP, and then WATCH MODE.

Select the desired setting, and then press ENTER.

RADIO SETUP

KEY BEEP

UNITS

>WATCH MODE

WATCH MODE

>ONLY 16

16CH+9CH

4-7-7 WX Alert (Weather alerts)

Note:

LHR-80 US only.

The NOAA provides several weather forecast channels on US and Canadian channel banks.

If severe weather such as storms or hurricanes are forecast, the NOAA broadcasts a weather
alert on 1050 Hz.

You can choose to watch weather alerts.

RADIO SETUP

UNITS

WATCH MODE

>WX ALERT

WX ALERT

>ON

OFF

Select RADIO SETUP then WX ALERT.

The cursor is ON (NOAA weather alerts on 1050 Hz on normal mode).

If you do not want

to watch these weather alerts, move the cursor to OFF.

Press ENTER for to confirm your selection.

If you chose to receive the weather alerts, the beeps will sound whenever a weather
alert is broadcast. Just press any button to hear it.

4-7-8 Set NMEA OUT (NMEA OUT)

RADIO SETUP

WATCH MODE

UWX ALERT

>NMEA OUT

NMEA OUT

>ON

OFF

This radio supports to output NMEA 0183 sentence of DSC & DSE.

Summary of Contents for LHR-80
















































































Search results

Summary of Contents for LHR-80

Reviews:

Related manuals for LHR-80

Brands by name

Popular brands

Lowrance LHR-80, Installation And Operation Instructions Manual

Search results

Summary of Contents for LHR-80

Reviews:

Related manuals for LHR-80

Brands by name

Popular brands