Lowrance LHR-80 Installation And Operation Instructions Manual Download

Page: 52 / 80

Lowrance - LHR-80 Installation and Operation Instructions

Press CALL/MENU to show the DSC CALL menu.

The cursor is at LAST CALL Move the cursor to ALL SHIPS and press ENTER.

The ALL SHIPS priority is set automatically to ROUTINE but there are 3 priority levels

available:

URGENCY:

when a serious situation or problem has occurred and could lead to a

distress situation.

SAFETY:

to send safety information to all other boats in range.

ROUTINE:

to send a routine call to all other boats in range.

Move the cursor to the priority level that is appropriate to your present situation

then press ENTER.

Select the working channel and press Enter. Duplex channels which are not usually

called are automatically eliminated from the suggested call list.

The radio asks for confirmation of the ALL SHIPS call. Press ENTER to select YES and

send the ALL SHIPS call.

The Tx icon is displayed on the screen while the call is being sent.

If the call is acknowledged press PTT to speak.

5-5 Reply to a call in your Call Log

Your call log contains the contact details of the 20 most recent incoming calls - so you can
use the call log to reply to any of these quickly. When the call log is full, the oldest entry is
overwritten. Therefore, to select the priority level:

112345678

INDIVIDUAL

ROUTINE

>SET CHANNEL

DSC CALL

GROUP

ALL SHIPS

>CALL LOG

11 112345678

INDIVIDUAL

ROUTINE

09:45 UTC

112345678

>CALL BACK

DELETE

SAVE MMSI

112345678

INDIVIDUAL

ROUTINE

>SENT?

Press call/menu to show the DSC CALL menu.

The cursor is at last call.

The contact details of the most recent incoming call are shown.

Summary of Contents for LHR-80
















































































Search results

Summary of Contents for LHR-80

Reviews:

Related manuals for LHR-80

Brands by name

Popular brands

Lowrance LHR-80, Installation And Operation Instructions Manual

Search results

Summary of Contents for LHR-80

Reviews:

Related manuals for LHR-80

Brands by name

Popular brands