Lowrance LHR-80 Installation And Operation Instructions Manual Download

Page: 2 / 80

Lowrance® is a registered trademark of Navico

No part of this manual may be copied, reproduced, republished, transmitted or

distributed for any purpose, without prior written consent of Lowrance Electronics.

Any unauthorized commercial distribution of this manual is strictly

prohibited.

Lowrance Electronics may find it necessary to change or end policies, regulations,

and special offers at any time. We reserve the right to do so without warning. All

features and specifications are also subject to change without warning. All screens

in this manual are simulated. LHR-80 VHF shown on cover. Other models covered

in the manual are similar.

In accordance with EU regulations, DSC is not available in Europe.

For free owner’s manuals and the most current information on this product, its

operation and accessories, visit our web site: www.lowrance.com

Lowrance Electronics

12000 E. Skelly Dr.

Tulsa, OK USA 74128-2486

Printed in China.

Important safety information

Please read carefully before installation and use.

DANGER

This is the safety alert symbol. It is used to alert you to potentially
hazardous situations. Obey all safety messages that follow this
symbol to avoid possible injury or death.

WARNING

WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury

CAUTION

CAUTION indicates a potentially hazardous situation which, if not
avoided, could result in minor or moderate injury.

CAUTION

CAUTION used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may result in
property damage.

Summary of Contents for LHR-80
















































































Search results

Summary of Contents for LHR-80

Reviews:

Related manuals for LHR-80

Brands by name

Popular brands

Lowrance LHR-80, Installation And Operation Instructions Manual

Search results

Summary of Contents for LHR-80

Reviews:

Related manuals for LHR-80

Brands by name

Popular brands