Lowrance LCX-18C Page 186 Operation Instructions Manual Download

Page: 186 / 200

178

Find Waypoints

1. Press

WPT

ENT

2. If searching for the waypoint

By Name

, press

ENT

. If searching for

the

Nearest

waypoint, press

↓

EAREST

ENT

. (To search by name,

jump to step 5 below.)

Find Waypoint menu, left; Find By Nearest command, center,

Find by Name command, right.

If you're looking

for nearest

, the Unit says it is calculating, then

a list of waypoints appears. The closest is highlighted at the top of the
list and the farthest at the bottom of the list.

Calculating message, left, and list of the nearest waypoints, right.

4. To see location information on the closest (highlighted) waypoint,
press

ENT

and the Waypoint Information screen appears. (If you

wanted to, you could select another waypoint from the list with the

↑

↓

keys.)

To navigate

to the waypoint, press

ENT

. (The Go To Waypoint

command is already highlighted.) The unit will show navigation in-
formation to the waypoint.

To find

the waypoint, press

↓

IND

ENT

. The Map Page

appears with the cursor highlighting the found waypoint.

Summary of Contents for LCX-18C








































































































































































































Search results

Summary of Contents for LCX-18C

Reviews:

Related manuals for LCX-18C

Brands by name

Popular brands

Lowrance LCX-18C, Operation Instructions Manual

Search results

Summary of Contents for LCX-18C

Reviews:

Related manuals for LCX-18C

Brands by name

Popular brands