Lowrance LCX-18C Operation Instructions Manual Download

Page: 163 / 200

155

To view tide information:

1. Select a Tide Station icon: use the arrow keys to move the cursor over
an icon. When it is selected, a pop-up name box appears.

2. After selecting the Tide Station icon, press

WPT

to display the Tide

Information screen.

Navionics chart showing Tide Station icon selected by cursor.

In the example above, the tide is at 2.8 feet and falling,

as shown by the down arrow at the top of the icon.

Tide Information screen.

The Tide Information screen displays daily tidal data for this station on
this date at the present time. The graph at the top of the screen is an
approximate view of the tidal range pattern for the day, from midnight

Tide Station
icon

Cursor line

Pop-up
name box

Summary of Contents for LCX-18C








































































































































































































Search results

Summary of Contents for LCX-18C

Reviews:

Related manuals for LCX-18C

Brands by name

Popular brands

Lowrance LCX-18C, Operation Instructions Manual

Search results

Summary of Contents for LCX-18C

Reviews:

Related manuals for LCX-18C

Brands by name

Popular brands