Lowrance LCX-18C Operation Instructions Manual Download Page 166

Page: 166 / 200

158

2. To return to the last page displayed, press

EXIT

3. You can return to this command and press

ENT

again to turn the fea-

ture off.

GPS Setup command, left; Require DGPS

command on the GPS Setup Menu, right.

Screen Contrast and Brightness

To access the Screen menu, press

MENU

ENT

Once in the Screen menu:

To adjust the display's contrast:

The

ONTRAST

slider bar is already selected. Press

→

←

to move the

bar. The left end of the scale is minimum contrast; the right end is
maximum contrast.

Screen Command, left, and Screen Menu with Contrast bar selected, right.

To adjust the display's brightness:

Press

↓

RIGHTNESS

. Press

→

←

to move the bar. The left end of the

scale is minimum contrast; the right end is maximum contrast.

To adjust the screen's display mode:

Summary of Contents for LCX-18C








































































































































































































Search results

Summary of Contents for LCX-18C

Reviews:

Brands by name

Popular brands

Lowrance LCX-18C, Operation Instructions Manual

Search results

Summary of Contents for LCX-18C

Reviews:

Brands by name

Popular brands