Lowrance HDS Live, Installation Manual

Page: 54 / 70

The CZone / NMEA 2000 Network interface bridge isolates the
power of the two networks, but allows data to be freely shared
between both sides.
The Interface Bridge can also be used for expansion of the NMEA
2000 network, when the maximum node limit (node = any device
connected to network) for the network has been reached or the
maximum cable length of 150 m will be exceeded. Once an
Interface Bridge has been fitted, a further 40 nodes and additional
cable length can be added.
The Network Interface is available from your BEP dealer. For more
information please refer to the BEP web site www.bepmarine.com.
NETWORK INTERFACE
Network 1 Network 2
CZONE
NETWORK
67$786
5HG1HWZRUN
*UHHQ1HWZRUN
CZONE NMEA2000
CZone setup
In order to communicate with the CZone modules connected to
the network, the unit must be assigned a unique CZone Display
Dipswitch setting.
The functionality of the CZone system is determined by the CZone
Config File which is stored on all CZone modules and the HDS Live.
The file is created using the CZone Configuration Tool, a specialized
PC application available from BEP Marine Ltd, and associated CZone
distributors.
For more information, refer to the documentation provided with
your CZone system.
Assigning the dipswitch setting
Every product capable of controlling and viewing CZone devices
must be assigned a virtual dipswitch setting. This setting is unique
for each device. Typically it is set after the configuration file already
54
3rd party support | HDS Live Installation Manual