manualshive.com logo in svg

Lowrance HDS Live, Installation Manual

Share
Download
Lowrance HDS Live Installation Manual Download Page 48

Network settings

Network info

Lists basic network information.

Device name

Assigning a name is useful in systems using more than one device
of the same type and size.

Auto configure

The auto configure option looks for all sources connected to the
device. If more than one source is available for each data type,
selection is made from an internal priority list.

Ú

Note: 

This option provides the best configuration of available

data sources for the majority of installations.

Data sources

Data sources provide live data to the system. When a device is
connected to more than one source providing the same data, the
user can choose the preferred source.
Before commencing with source selection make sure all external
devices and networks are connected and turned on. Manual
selection is generally only required where there is more than one
source for the same data, and the automatically selected source is
not the one desired.

48

Software setup

 | HDS Live Installation Manual

Summary of Contents for HDS Live







































































Reviews:

No comments

Brands by name

Popular brands

Load more brands