Lowrance HDS Live, Installation Manual

Page: 26 / 70

Pin Purpose
3
Receive positive RX+
4
Receive negative RX-
5
Shield
Ethernet devices
The Ethernet ports can be used for transfer of data and
synchronization of user created data. It is recommended that each
MFD in the system is connected to the Ethernet network.
No special setup is required for establishing an Ethernet network, it
is all plug-and-play.
Ethernet expansion device
Connection of network devices can be made via an Ethernet
expansion device. Additional expansion devices can be added to
provide the required number of ports.
HDMI input
The unit can be connected to an external video source to display
video images on its display.
HDMI connector details
Unit socket (female) Cable plug (male)
The unit is equipped with standard HDMI (Type A) connector(s). The
unit should be turned off prior to connecting or disconnecting an
HDMI cable.
Ú
Note:
While the HDMI standard does not state maximum cable
length, signal may be compromised on long runs. Only use
Navico or other high quality HDMI certified cables. 3rd party
cables should be tested before installation. On runs over 10 m it
may be required to add an HDMI amplifier or use HDMI-CAT6
adaptors.
26
Wiring | HDS Live Installation Manual