46
SD_300_pH_1 01/2013
c) Delete manual recording:
If data has already been saved, it can be deleted with the store button:
Press and hold for two seconds:
Open the delete menu
Switch the selection:
or
.
Delete nothing (cancel the process)
Delete all data sets
Delete the most recently saved data set
Confirmation of the selection, end of the delete menu
8.2 Automatic recording with adjustable "Func CYCL" cycle
If the "Func CYCL" logger function was selected (see "Configuration of the instrument"),
measurements are automatically recorded in the interval of the adjusted time cycle. The
logger cycle time is adjustable from 1 s to 60 min (see "Configuration of the instrument").
Recordable data sets: 10000
a) Start logger recording:
Press and hold for two seconds:
Start selection, then again
:
recording is started automatically.
Each save process is signalled by a brief display of "St.XXXXX".
In this mode, XXXXX stands for the number of the data set. If the logger memory is full,
the recording is stopped automatically, the display shows
b) Stop logger recording:
Press and hold for two seconds:
If a recording is in progress, the stop
menu appears
Switch the selection:
or
.
Do not stop the recording (cancel process)
Stop recording
Confirmation of the selection, end of the delete menu
Summary of Contents for SD 300 pH
Page 54: ...54 SD_300_pH_1 01 2013...
Page 55: ...55 SD 300_pH_1 01 2013...
