45
SD 300_pH_1 01/2013
8. Data logger
The instrument has two different logger functions:
"Func-Stor": Manual measurement recording at the push of the "store" button.
In addition, a measurement entry (L-Id) is requested
"Func-CYCL": Automatic cyclical recording in the adjusted time interval
The logger records two measurements per data set.
A data set is comprised of: pH, mV, mVH or rH measurement value
Temperature measurement value
L-ID measurement point (only with "Func-Stor")
Time and date at which the data is saved
The software GSOFT3050 (V3.0 or later) is required for the evaluation and transfer of the
data; it can be used to start and adjust the logger function very easily.
With the logger function activated (Func Stor of Func CYCL), the hold function is not avail-
able; then the "store" button must be used for the logger operation.
8.1 Manual recording ("Func-Stor")
a) Record measurements manually:
When the "Func Stor" logger function is selected (see "Configuration of the instrument"),
up to 1000 measurements can be saved manually:
Press briefly:
Data set is saved ("St. XX" is briefly displayed.
XX is the number of the data set)
Measurement point entry
"L-Id“: Number of the measurement point
with
or
buttons. Select number from 0 - 19999.
The entry is confirmed by pressing store
.
If the logger memory is full, the following appears
:
b) Call up manual recording:
Saved data sets can be read in the GSOFT3050 software and can also be observed in the
instrument display itself.
Press and hold for two seconds:
The following appears in the display:
i
"rEAd LoGG" only appears if the data sets have already been
saved! Without data sets, the configuration menu appears
Press briefly:
Switch between measurement values, measurement point
and date+time display of the data set
or
Switch between the data sets
Close the display of the data sets
Summary of Contents for SD 300 pH
Page 54: ...54 SD_300_pH_1 01 2013...
Page 55: ...55 SD 300_pH_1 01 2013...
