31
8. Data Output From The Meter
To send data out from the meter, exit the “Hold function“ and
the “Record function“ first. The display will not show “HOLD“
and “REC“ markers.
1) Press and hold the “SEND” button for at least 2 seconds until
the bottom right display shows “Transmit mode“, then release
the button.
The display will show the following screen alternately:
Use “ ” Up, “ ” Down to select different data memory blocks
(1 to 250).
The meter can save up to a maximum of 16,000 data sets.
These data will be saved into a maximum of 250 memory
blocks.
One “Memory Block“ means: The data that can be saved in one
routine Data Logger procedure. Please refer Chapter 6.3, Page 24.
µS
Transmit mode
1
158.4
µS
Transmit mode
xx:xx:xx
1
Block no.
First data in
each block
Start time of
each block
Start data address
of each block
