25
The data logger procedure is as follows:
a) Pushing the “Logger” button once will show the sampling time
value on the bottom left display then disappeared.
b) Press the “REC” button once to start the Data Record function
and a “REC“ symbol will be displayed.
c)
Auto Data Logger
The Sampling frequency can be set from 1sec to
8h 59min 59sec (refer to chapter 7.4 page 27).
E.g.: If a sampling frequency of 1 min is set, the
meter stores the measured value every minute
until the data logger function is stopped. Press
the “Logger” button once to start the Auto Data
Logger function, at the same the bottom right
display will show the indicator “Recording....“.
Now the Data Logger function has started. The
upper display will show a “DATA“ indicator along
with “REC“ marker.
Press the “Logger” button once to stop the data
logger function. The “DATA“ indicator will disappear. If you press
the Logger button once more the Data Logger function will
re-start.
d)
Manual Data Logger
(Sampling time is set to 0 second). Please
refer to chapter 7.4 page 27. Press the “Logger” button once
to save one set of data in the memory. At the same time the
bottom right display will flash the indicator “Recording....“. Now
the Data logger function has started. The upper display will show
the “DATA“ indicator along with the “REC“ marker.
e)
Memory full
With the data logger in action, if the bottom right display shows
“Full“, it indicates the memory has over 16,000 sets and is
therefore full.
•
To find out the Free Memory, please refer to chapter 7.1, Page
27.
•
To clear the memory of data, please refer to chapter 7.2, Page
27.
25.5°C 2.000 mS
AutoRange
25.5°C 2.000 mS
AutoRange
REC DATA
