30
7.11 DO Height (Altitude) Compensation Value Setting
• This procedure is only for the DO function.
• The lower display will show:
0 = meter
1 = ft (foot)
FT= foot 1 Foot = 0.3048 m
• Use “ ” Up, “ ” Down to select “0“ or “1“.
• Press “Enter” once, and the lower display will show:
Height Value
Meter
• Use “ ” Up, “ ” Down to select the desired Height value.
• Press “Enter” once, then press “ESC” to save the data and
return to the normal display.
• Typical setting is 0 meter (0 feet).
7.12 Escape from the SETTING function
Press “ESC” once to quit and return to the normal measurement
display or press “Enter”!
