Loveshaw LITTLE DAVID CAC60 Series, Owner'S Manual

Page: 22 / 49

are ordering, than "S" must replace the "P" or "B" in the part number. The "P"
refers to plated hardware and the "B" refers to black oxide finished hardware. In
this example "P ‐ S" are indicated in the row for the, " M4 x 12 Button Head ". This
means the "P" must be replaced with a "S" to convert the part number to
stainless steel. So the part number would be as follows. " FBHME012S10".
Table 1
ITEM QTY PART NUMBER DESCRIPTION SS MI
1 1 CAC60 ‐ 0001 ‐ 6 FRONT ROLLER ARM SS MI
2 1 SPH ‐ 1252 WAVE WASHER
3 1 CAC60 ‐ 0004 ‐ 4 TAPE GUIDE PLATE SS MI
4 1 CAC60 ‐ 0007 ‐ 5 LINK BAR SS
5 5 SPH ‐ 1276 SNAP RING, 8mm SS
6 4 BSG ‐ 1090 8mm FLANGE BUSHING
7 1 SPR ‐ 1044 SPRING, COMPRESSION SS
8 1 CAC60 ‐ 0134 ‐ 4 SLIDING BLOCK MI
9 1 CAC60 ‐ 0002 ‐ 4 ROLLER
10 2 SPH ‐ 1339 M8 WASHER SS
11 2 BSG ‐ 1098 BUSHING
12 1 CAC60 ‐ 0073 ‐ 3 SMALL ROLLER
13 4 FBHME012P10 M4 x 12 BUTTON HEAD P ‐ S
14 1 FFHMG016P10 FHCS M6 X 1.0 X 16 LG. P ‐ S
15 1 BSG ‐ 1085 BUSHING 16mm
16 1 FBHME020P10 M4 x 20 PAN HEAD SCREW P ‐ S
17 1 FHFNMEP M4 HEX NUT P ‐ S
18 1 SPR ‐ 1055 EXTENSION SPRING SS
19 1 .SA60/A SHAFT ASSEMBLY SS MI
20 1 BSG ‐ 1124 10mm LINEAR BEARING
21 1 SPH ‐ 1489 19mm EXTERNAL SNAP RING SS
22 1 CAC60 ‐ 0141 ‐ 4 KNIFE GUARD LOCK SS MI
23 1 SPH ‐ 1277 5/16 BRONZE WASHER
24 1 CAC60 ‐ 0142 ‐ 3 BUSHING RETAINER
25 1 FPACAC60 ‐ SB FINGER PLATE ASSEMBLY SS MI
26 1 FBHME016P10 BUTTON HEAD M4 ‐ 1.0 X 16 P ‐ S
27 1 FFWMFP FLAT WASHER M5 P ‐ S
28 6 BRG ‐ 2015 10mm FLANGE BEARING