Tape Threading:
The first step is to place the tape roll, on the cartridge exspandable tape core.
The tape core diameter is adjustable by turning the adjustor nut. Turning the
adjustor nut c.w. the core diameter increases and turning it c.c.w. the tape core
diameter decreases. Decrease the tape core enough in order to place the tape
roll on the core. Now turn the adjustor nut clockwise until the tape roll is
snuggly held. (refer to figure1)
Tape roll must be placed on tape core with adhesive side of tape facing to the
right. Refer to figure 2 for proper orientation.
Thread the tape over white roller. Threading arrows are installed throughout
the tape path of the cartridge to aid in threading. The back of the tape, the non
adhesive side rides against the surface of the white roller. (refer to figure 3)
Adjustor
nut
Figure
1
Figure
2
Adhesive
side
