FIGURE 1
1
1
2
2
3
3
4
4
A
A
B
B
TAPE ROLL TENSION ADJUSTMENT
CENTER LOCKING SCREW
TAPE CENTERING
NUT
TENSION LOCK
(TO
PREVENT UNAUTHORIZED
TENSION ADJUSTMENT)
MOUNTING SCREWS
PROPER
ENGAGEMENT
BEFORE INSTALLING THE TENSION LOCK MECHANISM, IT MAY BE
NECESSARY TO ADJUST THE TENSION ON THE TAPE ROLL AND
CENTER THE TAPE ON THE CARTRIDGE.
TENSIONING:
TO TENSION THE TAPE ROLL ON THE CARTRIDGE REMOVE THE TENSION LOCKING MECHANISM BY
REMOVING THE (2) MOUNTING SCREWS. NEXT USE THE TENSION ADJUSTMENT TO SET THE TAPE ROLL
TENSION. WHEN FINISHED REINSTALL THE TENSION LOCKING MECHANISM WITH THE (2) MOUNTING
SCREWS. MAKE SURE THE CUTOUT SLOT IN THE LOCKING MECHANISM GOES AROUND THE FINGER
TABS ON THE TENSION ADJUSTMENT KNOBS. (FIGURE 1).
CENTERING:
LOOSEN THE CENTER LOCKING SCREW. CENTER THE TAPE ROLL IN THE TAPE CARTRIDGE USING CENTERING
NUT. WHEN COMPLETE, TIGHTEN THE CENTER LOCKING SCREW. MAKE SURE THE CUT OUT SLOT IN THE
LOCKING MECHANISM GOES AROUND THE FINGER TABS ON THE TENSION ADJUSTMENT KNOBS. (FIGURE 1).
3" TAPE CORE
