I456
GB
CS
01
18
19
G
B
TERMINAL KITS FOR UL COMPLIANCE.
For UL compliance the ADXL from size 135 A to size 320 A must be equipped with terminal lugs and terminals protection kits, to be purchased separately.
Here below the selection table with the correct ordering codes.
UL terminal kits for ADXL 0135 600, ADXL 0162 600 and ADXL 0195 600
EXA01: It contains n°3 terminal lugs 250kcmil. For each soft starter you need to add n°2 kits EXA01 (one for line-side and one for load-side).
For information about conductors section and tightening torque see the section “Power connections” in the chapter “TECHNICAL CHARACTERISTICS”.
EXA02: It contains n°3 terminals protection. For each soft starter you need to add n°2 kits EXA02 (one for line-side and one for load-side).
The picture below shows a section of the ADXL with mounted terminal lugs kit EXA01 and terminals protection kit EXA02.
SOFT STARTER CODE TERMINAL LUGS TERMINALS PROTECTION
ADXL 0135 600 2pcs of EXA01 2pcs of EXA02
ADXL 0162 600 2pcs of EXA01 2pcs of EXA02
ADXL 0195 600 2pcs of EXA01 2pcs of EXA02
ADXL 0250 600 2pcs of EXA03 2pcs of EXA04
ADXL 0320 600 2pcs of EXA03 2pcs of EXA04
Table for the correct selection of the terminal lugs and terminals protection kits for UL compliance.
