Attribute
Model
Number
Lumen
Output
Voltage
Range
Maximum Amperage
Requirement
Nominal
Operating
Amperage
LW1-06S
1164
6-38 VDC
1.870 A
0.806 A
LW1-12S
2328
6-38 VDC
3.707 A
1.680 A
LW1-18S
3492
6-38 VDC
5.390 A
2.580 A
LW1-24S
4656
6-38 VDC
7.416 A
3.500 A
LW1-31S
5820
6-38 VDC
9.289 A
4.512 A
LW1-37S
6984
6-38 VDC
12.566 A
5.570 A
LW1-43S
8148
6-38 VDC
14.901 A
6.432 A
LW1-50S
9312
6-38 VDC
15.374 A
7.382 A
•
Fully ROHS compliant
•
6 – 38 Volt Direct Current (DC) operating range.
•
Deutsch electrical connection and pigtail included for ease of unit
installation and removal as needed.
•
Highly efficient polycarbonate optic.
Product Description Continued
Electrical Current Requirements Per Unit
•
The following table provides performance characteristics of each model.
The column labeled “Maximum Amperage Requirement” is of particular
importance and should be used to determine the correct switch
amperage rating discussed in section 2, Figure 2.2 and Figure 2.3.
Table 3.1: Performance characteristics of the LW1 product family
4. Product Maintenance
•
It is imperative that dirt, mud, and debris be kept out of the cooling
geometry around the housing of this unit. Failure to do so can greatly
reduce the operational life of the LED modules.
•
Verify on a regular basis that there is no dirt, mud, or debris that has
collected in the cooling geometry of the housing.
9
8
Product Description
3. General Features
The figure above displays the location of the main external features of each
LOTTworx LW1 series light. The other main features of this product series
include:
•
CNC milled billet 6061-T6511 aluminum end caps.
•
Heat sink/housing extruded from 6063-T5 aluminum.
•
Stainless steel external fasteners.
•
Extremely strong cold rolled steel mounting brackets.
•
Durable powder coated housing, end caps, and brackets
•
Nanotechnology conversion coating applied under the durable powder
coating.
•
Fully sealed housing that is water resistant and dust proof.
•
Pressure equalization vent
•
Polycarbonate lens with abrasion resistant hard coat applied to external
surface.
•
This product utilizes the super powerful CREE Xlamp XM-L2 LED’s.
•
Greater than 92% efficient inductive step down LED driver circuitry.
•
Thermal shutdown protection
•
Reverse polarity protection.
Copyright 2015 LOTTworx
Copyright 2015 LOTTworx
