Lorex Vantage LZC7091, Instruction Manual

Page: 32 / 40

22
Changing Protocol Information
5.1 ACCESSING THE DIP SWITCHES
To access the DIP switches, you must remove the camera from the case.
To do this, you must remove the camera from the case. Rotate the dome
cover counterclockwise to remove. Remove the base attachment screws
(3x) and remove the camera base. See illustration below.
Dome
cover
Base attachment
screws
Camera
Camera base
Removing the camera from the case
5.2 SETTING THE CAMERA ID
The camera ID is how the DVR identifies PTZ cameras.
Camera ID is set using the larger DIP switch panel with 8 switches. Each
switch represents a binary digit (i.e. switch #1=1, #2=2, #3=4, etc.).
Camera ID can be anything between 1-255. See the address example
table on the next page.
Camera ID DIP Switches