3
Connecting the Camera
English
1. Connect the 6-pin connector on the 3ft cable to the camera.
• To do this, you must remove the camera from the case. Rotate the
dome cover counterclockwise to remove. Remove the base
attachment screws (3x) and remove the camera base. See illustration
below.
Dome
cover
Base attachment
screws
Camera
Camera base
Removing the camera from the case
NOTE:
Do not use force when pulling out the 6-pin connector. The 6-pin
connector has a release latch under the connector. Press the latch when
disconnecting it from the camera.
Release latch
2. Connect the female power connector on the 3ft cable to the male
power connector on the 100ft extension cable.
OR
Connect the power adapter directly to the camera and to a local power
outlet.
Summary of Contents for Vantage LZC7091
Page 10: ...iv...
Page 36: ...26 Dimensions 7 DIMENSIONS Units mm Camera Camera and Wall Mount...
Page 39: ......
