17
Controlling the PTZ Camera with your DVR
English
4. Configure the following:
•
Channel:
Select the channel the
camera is connected to.
•
Protocol:
Select the protocol
(default:
Pelco-D
).
•
Baud rate:
Select the camera’s
baud rate (default:
2400
).
•
Data Bit:
Select
8
.
•
Stop Bit:
Select
1
.
•
Parity:
Select
None
.
•
Cruise:
Select
Enable
to enable PTZ cruise.
•
Address:
Enter the camera’s ID (default:
001
).
5. Click
Apply
to save your settings.
4.2 CONTROLLING THE CAMERA
TIP:
Turn off motion detection on your DVR for the channel with the PTZ
camera connected. Otherwise, the DVR will detect the PTZ movement as
motion. See your DVR’s instruction manual for details.
To control the PTZ camera locally on the ECO2 DVR:
1. Select the channel that the PTZ camera is connected to.
2. Press and hold the
PTZ
button on the front panel of the system for 6
seconds.
PTZ button
Press & hold
6 seconds
•
OR
, Right-click with the mouse to open the Menu Bar and click the
PTZ button (
).
• Enter the DVR password (default:
000000
) and click
Apply
.
Summary of Contents for Vantage LZC7091
Page 10: ...iv...
Page 36: ...26 Dimensions 7 DIMENSIONS Units mm Camera Camera and Wall Mount...
Page 39: ......
