49
Using the Main Menu
Configuring System Video and
Audio settings
The A/V Setup menu allows you to
configure the system’s video output
settings, and system volume.
To adjust the system’s audio output
volume:
1
From the Advance menu, click
A/V Setup
.
2
Click the
Volume
button.
3
Drag the audio slider to adjust the output
volume of the system. The greater the
number, the higher the volume.
4
Right-click to exit the menu.
5
Click
Apply
to save your settings.
Configuring Video Output Settings:
1
From the Advance menu, click
A/V Setup
.
2
Configure the following:
•
Video System
: Select
PAL
or
NTSC
.
•
Video Output (16 ch. only):
Select the port
the video will output from. Select from the
MAIN-OUT
port or the
SPOT OUT
port.
•
View Setup (16 ch. only)
: For details, see
“Appendix M: Assigning camera channels
(16 Ch. only)” on page 120.
•
Init. DEV (16 ch. only)
: Select the output
device that the mouse cursor appears on.
Select from
V OUT
for the mouse cursor to
appear in the BNC Output,
VGA
for the
mouse cursor to appear in VGA output.
•
VGA Resolution
: Select the VGA output
resolution. By default, the resolution is set
to
1024 x 768
.
• You may change the VGA output
resolution to the following:
800 x 600,1024 x 768, 1280 x 1024,
1440 x 900
• Output Device
:
• Select
VGA
if you are using a VGA
monitor (default) to connect to the
system (4/8 channel only).
• Select
V OUT
to output video from the
system’s Video Out port (4/8 channel
only).
•
SEQ Dwell Time
:
Adjust the Sequence
Dwell time of the DVR. Enter the desired
number of seconds you want the each
channel to display in sequence mode,
before switching to the next channel.
Adding "Privacy Zones" to channels
Defining a privacy zone in the channel
allows you to block out a portion of the
channel with a black box.
To add a privacy zone to a channel:
1
From the Advance menu, click
A/V Setup
.
2
Click
Privacy Zone.
4/8 channel A/V menu.
16 channel A/V menu.
Summary of Contents for VANTAGE LH110 ECO SERIES
Page 167: ......
