44
Using the Main Menu
Setting up E-mail Notification
The system can send e-mail
notifications when it detects motion, or
when an alarm parameter triggers. The
16 channel model sends e-mail
notifications if an alarm block device
triggers (i.e. motion sensor detects
movement).
To set up e-mail notification:
1
Click the
Email Setup
button.
2
From the drop-down menu, select from:
•
Enable
: Uses custom e-mail server
settings.
•
Disable
: Disables e-mail notification.
•
Default
: Uses the Lorex e-mail server to
send out alarm notifications. This is the
recommended selection.
If you select "Enable", and want to use
your own e-mail server, configure the
following:
•
SSL
: Select
ON/OFF
to enable/disable
Secure Socket Layer protocol
•
SMTP Port
: Enter your SMTP address
•
SMTP Server
: Enter your SMTP Server
•
Sender
: Enter the sender e-mail address.
This can be any address of your choice
•
Password
: Enter your e-mail server’s
password
•
Receiver:
Enter the recipient’s e-mail
address
•
Interval:
Enter the interval the DVR waits
before sending a new e-mail notification.
For example, if you select a 3 minute
interval, the DVR will send out e-mail
notifications every 3 minutes until the DVR
stops detecting motion / alarm. The DVR
will only send out notifications when it
detects motion/alarm triggers.
3
Click
Apply
to save your settings.
If you want to use Lorex’s e-mail
server:
1
In the Email drop-down menu, select
Default
.
2
In the Sender field, enter the e-mail
address of the sender. This can be any
e-mail address of your choice.
3
In the Receiver field, enter the e-mail
address you want the DVR to send alarm
notifications to.
4
In the Interval drop-down menu, enter the
Duration the DVR must wait before
sending out a new notification.
5
Click
Apply
to save your settings.
6
Click the
TEST
button to send out a test
e-mail.
Email Setup
Default
Summary of Contents for VANTAGE LH110 ECO SERIES
Page 167: ......
