112
Appendix H: Connecting a PTZ Camera
Appendix H: Connecting a PTZ Camera
You can connect RS-485 PTZ cameras (not included) to the PTZ Control Block on the rear
panel.
To connect a PTZ camera to the system:
1
Connect the Transmit Cable to the
TX (+)
port of the PTZ block on the rear panel.
• 16-channel models: Connect the Transmit Cable to the
RS-485 +
port.
2
Connect the Receive Cable to the
TX (-)
port of the PTZ block on the rear panel.
• 16-channel models: Connect the Receive Cable to the
RS-485 -
port.
3
Connect the video cable to a BNC port.
To enter PTZ camera settings in the DVR:
1
Right-click to open the sub-menu, and then click
Main Menu>Device>PTZ.
2
Enter the PTZ protocol settings into the PTZ setup menu. Consult your PTZ camera’s user’s
guide for PTZ protocol details.
8 channel model shown
16 channel
4/8 channel
TX+
TX-
BNC
BNC
TX+
TX-
Summary of Contents for VANTAGE LH110 ECO SERIES
Page 167: ......