27
Motion Set
Motion Set
1.
MOTION
- Sets the motion detection alarm mode.
Navigate by pressing the
K
and
L
buttons to
highlight, and press the
OK
button to switch
between
MOTION
alarm modes:
•
OFF
- Motion Detection is disabled
•
OSD
(On Screen Display) - Visual alert only
[MD]
•
OSD + BUZZER
- Both Visual and Audible alerts
2.
CHANNEL
- Configure the
MOTION
detect
settings for channel sets CH1/5, CH2/6, CH3/7 and
CH4/8. Navigate by pressing the
K
and
L
buttons
to highlight, and press the
OK
button to select the
channel to change. Once a channel has been
selected the
SENSITIVITY
and
AREA
can be
configured.
3.
SENSITIVITY
- Configure the sensitivity of the
MOTION
detect. Navigate by pressing the
K
and
L
buttons to highlight, and press the
OK
button to
set the
SENSITIVITY
mode from [00] to [05] (where
05 is the most sensitive setting). Press
OK
to
accept the selection.
This submenu allows you to change the configurations for
MOTION
detection, using the monitors
built-in Pixel Based Motion Detection.
[MOTION SET]
MOTION
CHANNEL
SENSITIVITY
AREA
RETURN
EXIT
:
:
:
:
:
:
[OFF]
[CH1/5]
[02]
[00]
[
]
[
]
