background image

All the safety and operating instructions should be read before the appliance is operated. The improper 
operation may cause irreparable damage to the appliance.

• Please lift and place this equipment gently.

• Do not expose this equipment under to direct sunlight.

• Do not use this equipment near water or in contact with water.

• Do not spill liquid of any kind on the equipment.

• Do not unplug the power connector before turn the power off correctly.

• This equipment should be operated using only the power source from standard package.

• Unauthorized repair or parts substitutions may result in fire, electric shock or other hazards.

• Do not switch the Power On & Off within short period (within 3 seconds).

• Do not attempt to service this equipment by yourself. Refer all servicing to qualified service personnel.

• This unit should be operated only from the type of power source indicated on the manufacturer’s label.

• This installation should conform to all local codes. 

SAFETY WARNING

CAUTION

RISK OF ELECTRIC SHOCK.  DO NOT OPEN.

CAUTION:  TO REDUCE THE RISK OF ELECTRIC SHOCK,  DO NOT

REMOVE COVER (OR BACK).  NO USER-SERVICEABLE PARTS
INSIDE.  REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.

!

Explanation of two Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert
the user to the presence of uninsulated "dangerous voltage" within  the product's enclosure that
may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence 
of important operating and maintenance-(servicing) instructions in the literature accompanying
the appliance.

!

2

Summary of Contents for SGQ4160
















Reviews: