6
1. 2.4GHz A/V ANTENNA
High gain dipole antenna receives
audio and video signal from the camera.
2. LED CHANNEL INDICATORS
Indicator light shows selected channel
3. AUTO/MANUAL BUTTON
Used to view a camera in full
screen, or to have the system automatically
rotate the camera between up to four
cameras
4. CHANNEL SELECTOR BUTTON
Push button for manual selection of
cameras 1-4.
5. ON/OFF POWER SWITCH
ON/OFF power switch. Ensure this switch
is set to OFF before plugging the system into
an electrical outlet
6. RF OUT JACK
Used to connect the receiver to a TV using
the supplied coaxial cable.
7. DC IN JACK
Power source for the receiver. Connect
the supplied 9V 500mA AC adapter to
the receiver
8. VIDEO OUTPUT JACK
(Yellow)
RCA jack for Video output connection
when connecting the receiver to the
television using the supplied RCA cable
9. AUDIO OUT JACKS
(White)
RCA jacks for Audio output
connection when connecting the receiver
to the television using the supplied RCA
cable.
10. CHANNEL 3/4 SELECTOR SWITCH
Used to view picture on television when
using Coaxial cable (preset to channel 3)
CONTROLS AND FUNCTIONS
WIRELESS RECEIVER
9
INSTALLATION OF THE RECEIVER
CONNECTION OF RECEIVER TO TELEVISION USING RCA CABLES
1.Connect one end of the RCA cables to the Audio/Video jacks at the back of the
Receiver. Plug the other end of RCA cables into the Audio/Video in jacks on
your television.
2.Turn both the Camera and Receiver ON. Set your TV to Video mode to view the
receiving signal from the Camera. (Consult your televisions owners manual on
setting the television to Video (Aux) mode.
3.Search the channel 1-4 by using Channel Selector Switch on the Receiver and
Camera. Select best one for optimum reception in your area.
4.Adjust the antenna direction as necessary.
Ensure the Power Switch on the Receiver and Camera are turned OFF prior to
proceeding with the following steps.
NOTE
1. Place the wireless receiver near your television (or monitor)
2. Connect the supplied 9V 500 mA AC adapter to the DC IN jack at the rear of
the receiver and plug it into an electrical outlet.
Both Camera and Receiver units must be set to same channel.
NOTE
WIRELESS CAMERA – BATTERY OPTION
SLIDE IN
ELECTRICAL OUTLET
RECEIVER
TELEVISION
REAR VIEW
TOP VIEW
1
5
6
7
8
9
10
2
4
3
