Lorex NR800 Series, Instruction Manual, Page: 98 / 180

Using FLIR Cloud™ Client for PC or Mac 18
2. Click .
3. Under Cruise ID , select the number of the tour you would like to configure.
4. (Optional) Under Cruise Name , enter a name for the tour.
5. Use the chart to select which presets you would like to include in the tour and the or-
der of presets.
• Preset : Select the preset number.
• Time(s) : Enter the time in seconds the camera will remain on the selected preset.
• Operation : Click to add a preset to the tour. Click to delete a preset from
the tour.
6. Click OK to save changes.
To run a PTZ tour:
1. Select the tour number and click .
18.3.3 PTZ Pattern
Patterns automatically cycle the camera between two positions.
To create a pattern:
1. Click to open the Advanced controls. Select Pattern .
2. Select the number of the pattern you would like to set up.
3. Move the camera into the desired start position.
#LX400021; r. 4.0/30344/30494; en-US 88