Lorex NR800 Series, Instruction Manual, Page: 75 / 180

Using the Main Menu 16
2. Under Event Type , select the event type you would like to configure.
• Net Disconnection : The system has lost connection to the network.
• IP Conflict : More than one device on your network has the same IP address.
• MAC Conflict : More than one device on your network has the same MAC address.
• All : Configure responses for all network events.
3. Configure the following for the selected event type:
• Enable : Check to enable the selected event type.
• Show Message : Check to show a popup message when the selected event
occurs.
• Alarm Out : Check the box to activate alarm output devices (not included) and se-
lect the alarm output devices (not included) will be activated when the selected
event occurs.
• Latch : Enter the number of seconds an alarm will activate after the selected event
occurs.
• Send Email : Check to enable email alerts. You must configure email alerts before
you will be able to receive them (see 16.3.5 Configuring Email Alerts , page 58).
• Buzzer : Check to activate the system buzzer.
4. Click OK to save changes.
16.3.14 Storage
The Storage menu allows you to configure the recording schedule and hard drives con-
nected to the system.
16.3.15 Configuring the Video Recording Schedule
You can set a custom recording schedule according to your needs. For example, you can
set the system to record continuously during business hours and record on motion de-
tection only outside of business hours.
A custom recording schedule helps reduce the amount of hard drive space required, in-
creasing the time your system can retain recordings.
To configure the video recording schedule:
1. From the Main Menu, click and then click Storage>Schedule>Record .
2. Under Channel , select the channel you would like to configure or select All .
#LX400021; r. 4.0/30344/30494; en-US 65