Lorex NR800 Series, Instruction Manual, Page: 164 / 180

Connecting a PTZ Camera (NR800 Series) 21
2. Click the Preset tab.
3. Enter the number of the preset you want to create under Preset .
4. Move the camera to the desired position and click Set .
To go to a preset:
• Under No. , select the number of the preset you would like to go to and click .
21.2.2 Tours
Tours will cycle through a set of presets.
To create a tour:
1. Click to open the aux menu.
2. Click the Tour tab.
3. Under Patrol No. , select the tour you would like to configure.
4. Under Preset , select a preset you would like to add to the tour.
5. Click Add Preset .
6. Repeat steps 4 and 5 to add additional presets to the tour.
NOTE
Click Del Tour to clear all presets from a tour.
To run a tour:
• Under No. , select the number of the tour you would like to go to and click .
21.2.3 Pattern
Patterns automatically cycle the camera between two positions.
To create a pattern:
1. Click to open the aux menu.
#LX400021; r. 4.0/30344/30494; en-US 154