Lorex NR800 Series, Instruction Manual, Page: 35 / 180

Using the System 9
To use Instant Playback:
1. Move your mouse to the top of the channel display and click .
NOTE
By default, the system will begin playback from 5 minutes ago. You can increase this to up to 60 mi-
nutes using the
Realtime Play setting in Main Menu>Setting>General .
2. Right-click to exit Instant Playback.
9.5.2 Using Digital Zoom in Live Display
1. Move your mouse to the top of the channel display and click to activate digital
zoom. A check mark will appear in the icon to indicate digital zoom is activated.
NOTE
You may activate digital zoom in multiple channels at the same time.
2. Click and drag inside the channel to zoom in.
• Click and drag to pan the zoom area.
• Right-click to zoom out and select a new zoom area.
• Click to disable digital zoom. Note that the channel will remain at the same
zoom level until you right-click inside it.
9.5.3 Using Real-time Backup
Real-time backup allows you to save footage from the live display to a USB thumb drive
(not included) or external hard drive (not included).
To use Real-time Backup:
1. Insert the USB thumb drive or external hard drive into one of the USB ports on the
system.
2. Move your mouse to the top of the channel display and click to start Real-time
Backup.
3. Click again to end Real-time Backup. The file is saved to your USB device.
NOTE
If the system prompts you to log in, you will need to click again to start Real-time Backup after
logging in.
9.6 Using the Virtual Keyboard
The Virtual Keyboard is used to input text or numeric values in certain menus.
#LX400021; r. 4.0/30344/30494; en-US 25